GE EPM 6000 Power Screwdriver User Manual


 
CHAPTER 4: USING THE METER
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE 4–17
4.4 Operating Mode
4.4.1 Description
Operating mode is the EPM 6000 meter’s default mode. If scrolling is enabled, the meter
automatically scrolls through these parameter screens after startup. The screen changes
every 7 seconds. Scrolling is suspended for 3 minutes after any button is pressed.
Push the DOWN button to scroll all the parameters in operating mode. The active
parameter has the indicator light next to it on the right face of the meter. Push the RIGHT
button to view additional displays for that parameter. A table of the possible displays in the
operating mode is below. Refer to Operating Mode Screens on page 6–3 for a detailed
navigation map of the operating mode.
Note
Readings or groups of readings are skipped if not applicable to the meter type or hookup,
or if explicitly disabled in the programmable settings.
Table 4–3: Operating Mode Parameter Readings
Parameter
designator
Possible display readings
VOLTS L-N VOLTS_LN
VOLTS_LN_
MAX
VOLTS_LN_
MIN
VOLTS_LN_
THD
VOLTS L-L VOLTS_LL
VOLTS_LL_
MAX
VOLTS_LL_
MIN
AMPS AMPS_MAX AMPS_MIN AMPS_THD
W/VAR/PF W_VAR_PF
W_VAR_PF
_MAX_POS
W_VAR_PF
_MIN_POS
W_VAR_PF
_MAX_NEG
VA/Hz VA_FREQ
VA_FREQ_
MAX
VA_FREQ_ MIN
Wh KWH_REC KWH_DEL KWH_NET
VARh KVARH_ POS KVARH_ NEG KVARH_ NET
VAh KVAH