GE EPM 6000 Multi-function Power Metering System Power Screwdriver User Manual


 
3–20 EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 3: INSTALLATION
FIGURE 3–16: RS485 Communications Installation
The EPM 6000 COM2 port can be programmed through the faceplate or with software.
The standard RS485 port settings are:
Address: 001 to 247
Baud rate: 9.6, 19.2, 38.4, or 57.6 kbps
Protocol: Modbus RTU, Modbus ASCII, or DNP 3.0