Filter
Top Products
16 308–293
Daily
Gun Care, Flushing, and Cleaning
8. Remove
the air cap ring (12) and air cap (19).
9. T
rigger the gun while you remove the fluid nozzle
(20) from the gun with the gun wrench (35).
Fig. 5
02060A
35
20
12, 19
CAUTION
T
rigger the gun whenever you tighten or remove the
nozzle. This keeps the needle seat away from the
nozzle seating surface and prevents the seat from
being scratched.
10.
Soak the ring, air cap, and fluid nozzle in solvent.
11.
Dip the end of a soft-bristle brush into a compatible
solvent. Do not continuously soak the brush’
s
bristles with solvent and do not use a wire brush.
Fig. 6
02007
12.
With the gun pointed down, clean the front of the
gun, using the soft-bristle brush and solvent.
Fig. 7
02062A
13.
Scrub the the air cap ring, air cap, and fluid nozzle
with the soft-bristle brush. T
o clean out air cap
holes, use a soft implement, such as a toothpick,
to avoid damaging critical surfaces. Clean the air
cap and fluid nozzle daily
, minimum. Some appli
-
cations require more frequent cleaning.
Fig. 8
02011