Filter
Top Products
26 308–293
Accessories
Cleaning Brush 105–749
For use in cleaning gun
Lubricant 111–265
One 4 oz. (1
13 gram) tube sanitary (non-silicone)
lubricant for fluid seals and wear areas.
03405
Fluid T
ube Kit 236–318
Allows air and fluid hoses to be
more easily strapped together
and eases gun movement by
the operator
.
High Pressure Air Cap 189–755
Optimal air cap for use in non-HVLP compliant opera
-
tions. W
ater-base compatible
Air Pressure V
erification Kit 224–187
For use in checking gun atomizing air pressure at
various supply air pressures.
Not
to be used for
actual spraying.
Assemble kit as shown in
drawing below
. Screw
tube connector into gun’
s
side port. Turn on the air
to the gun, then trigger the
gun and read the resulting air pressure.
NOTE: T
o be “HVLP compliant”, the atomizing air
pressure must not exceed 10 psi (70 kPa, 0.7 bar).
SST Fluid Pressure Regulator
100 psi (0.7 MPa, 7 bar) Maximum Inlet Pressure
3–30 psi (21–210 kPa, 0.2–2.1 bar)
Regulated Pressure Range
T
o regulate the fluid pressure to the gun.
1/4 npt(f) inlet and outlet
236–081 Regulator without
pressure gauge
236–449
Regulator with pressure gauge
Air Hose Assembly 210–867
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
25 ft. (7.625 m) long, 5/16 in. (7.94 mm) ID, 1/4
npsm(f) swivel, buna-n
Air Hose Assembly 185–353
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure
Optional air hose for use when higher air flow is
required. 25 ft. (7.625 m) long, 3/8 in. (9.53 mm) ID,
1/4 npsm(f) swivel, buna-n
Air Hose Quick-disconnect
Install between gun air inlet fitting and air hose.
208–536 Coupler, 1/4 npt(f)
169–970
Nipple,
1/4 npt(m)
Fluid Hose Assembly 205–142
300 psi (2.1 MPa, 21 bar) Maximum Working Pressure
Nylon with neoprene cover
, 0.25 in. (2.4 mm) ID,
3/8 npsm(fbe), 25 ft. (7.6 m) long
Air Filter and Moisture Separator 106–149
250 psi (1.7 MPa, 17.4 bar) Maximum
Working Pressure
Removes moisture, oil, and other contami
-
nants from the compressed air supply
.
1/2 npt(fbe)
Air Pressure Regulator Kit 210–613
300 psi (2.1 MPa, 20 bar) Maximum
Inlet Pressure
0-125 psi (0–0.87 MPa, 0-8.75 bar)
Regulated Pressure Range
T
o regulate the air pressure to the gun.
Includes gauge, air shutof
f valve, and
fittings. 1/4 npt(m)
0135
Air Shutoff V
alve 208–390
500 psi (3.4 MPa, 34 bar) Maximum Working Pressure
T
o shutof
f air supply line. 1/4 npt(m)
Gun Air Regulator Assy
. 235–1
19
0–100 psi (0–0.7 MPa, 0–7 bar) air
regulator to control air to gun
01727
01725
SST Pressure Cup Kit 235–373
with single air regulator
1 qt. (0.95 liter) capacity
, 304 stainless
steel cup. Includes a pressure relief
valve and a single air regulator and
gauge.