Filter
Top Products
Repair
309856P 37
CAUTION
Do not overtighten mix module nut (25). Overtighten-
ing can deform impingement holes and cause slow
gun actuation.
5. Lubricate all threads and reassemble mix module
nut (25) fingertight. Tighten additional 1/12 turn
with air cap (9) or wrench. Install front seal (46) on
rod (31).
TI3843a
9
46
31
25
1/12 Turn
6. Reinstall CeramTip (40). Lubricate all threads.
Install retainer (28) fingertight, plus 1 notch. Install
air cap (9) fingertight.
7. Adjust Purge Rod, page 15.
TI3843a
40
28
9