Filter
Top Products
INSTALLATION
PREPARING
FOR
USE
Operating instructions and safety warnings are given in
the manuals for the separate components.
separate manual
306-997;
service instructions are given in
CONNECTING
HOSES
Connect fluid
hose
to nipple on outlet manifold.
Do
not
use thread sealer. Connect spray
gun
to swivel.
NEVER exceed
120
psi
(8
bar) air pressure to pump.
At
120
psi, the pump develops up to
3600
psi
(248
bar) fluid pressure. Be sure that any hose.
valve,
etc.,
that you use will withstand the pressures develoDed.
Connect
a
112
ID
staticgrounded air hose to the
112
npt air
inlet union. You should have
a
bleed type master airyalve
in your air supply line
so
that you can shut off air before
it
reaches unit.
ary
unit,
install the
filter
conversion kit. Refer to manual
Flush unit as described in
306-997.
If
you have the station-
306-812
for instructions.
Troubleshooting and service instructions
are
given in
306-
997
and the separate manuals for each component assembly.
307-051
1