Filter
Top Products
308584 39
Service
Barrel Removal
1. Prepare the gun for service as instructed on
page 30.
2. Loosen the nut (78) from the ferrule housing (79).
Pull the ferrule housing through the gun bracket
(76). See Fig. 25.
3. Loosen the three barrel screws (5) with the ball-
end wrench (63).
4. Hold the gun handle (7) with one hand and pull the
barrel (3) straight away from the handle to remove
it. Be prepared to catch the nut (78). See Fig. 26.
CAUTION
To avoid damaging the power cartridge (18), always
pull the gun barrel straight away from the gun han-
dle. If necessary, gently move the barrel from side to
side to free the power supply from the gun handle.
5
63
Fig. 25
05156
78
79
7576
3
7
18
Fig. 26
05157
78