Filter
Top Products
309445
Rev. E
To find your local Graco authorized service
center:
D Call us at 1–800–690–2894
D Visit our website at www.graco.com
INSTRUCTIONS–PARTS LIST
Important Safety Instructions
D Read all warnings and instructions
in this manual. Save these
instructions.
Pressure Roller with 20”
Heavy Duty Extension, EvenFlowt Roller
Frame and Contractort Inline Valve
– For the rolled application of architectural paints and
coatings –
Model 245397, Series C
D 20 in. (50 cm) Heavy-Duty Extension
D 9 in. (23 cm) EvenFlowt Roller Frame
D 1/2 in. (13 mm) Nap Roller Cover
D Contractort Inline Valve
3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure
*
The best operating pressure is the lowest pressure that provides
an even paint supply to the roller and typically does not exceed
300 psi (2.1 MPa, 21 bar).
*
CAUTION
Never leave water in the pump, inline valve, or roller frame.
Doing so could cause corrosion and damage from freezing.
For storage, flush the system with Graco Pump Armort or
mineral spirits/paint thinner.
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001