311082B
Instructions
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Pressure Roller with
20-inch Fixed Extension
- For application of architectural paints and coatings -
Model 287713, Series A
• 20 inch (50 cm) heavy-duty extension
• 9 inch (23 cm) roller frame
• 1/2 inch (13 mm) nap roller cover
3600 psi (24.8 MPa, 248 bar) Maximum Working
Pressure*
*The best operating pressure is the lowest pressure that
provides an even paint supply to the roller and typically
does not exceed 300 psi (2.1 MPa, 21 bar).
CAUTION
Never leave water in pump, gun or pressure roller.
Doing so could cause corrosion and damage from
freezing. For storage, flush the system with Pump
Defender
™
or mineral spirits/paint thinner.
WLD