Filter
Top Products
COPYRIGHT © JANUARY, 2014 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#DM16256 PRINTED IN TAIWAN
The following change was recently made to this machine since the owner's manual was printed:
• An additional set of
1
⁄4" eccentrics has been included with this bandsaw.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
READ THIS FIRST
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Model G0555LX/G0555LANV
***IMPORTANT UPDATE***
For Machines Mfd. Since 01/14
and Owner's Manual Revised 04/13
Introduction
The model G0555LX and G0555LANV bandsaws
come with
3
⁄8" eccentrics (Part # P0555LX129)
installed behind the guide bearings. An additional
set of
1
⁄4" eccentrics (Part # P0555LX136) has
been included for easier guide bearing adjust-
ments with
1
⁄8" bandsaw blades.
The reduced thickness of the
1
⁄4" eccentrics pro-
vides more space for guide bearing adjustments
with
1
⁄8" blades, helping ensure blade support
bearings will not damage the blade tooth set.
Installation
1. DISCONNECT MACHINE FROM POWER!
2. Put on heavy leather gloves and open wheel
covers. Remove blade as described in own-
er's manual.
3. Remove guide-bearing cap screws and guide
bearings (see Figure 1).
4. Loosen cap screw on guide shaft bracket
1
⁄2
turn.
5. Remove
3
⁄8" eccentrics from guide shaft
bracket, and replace with
1
⁄4" eccentrics.
6. Retighten cap screw on guide shaft bracket,
then re-install guide bearings and guide-
bearing cap screws.
7. Install
1
⁄8" blade as described in owner's
manual and close wheel covers.
8. Adjust upper and lower guide bearings and
support bearings as described in manual.
Guide
Bearing
Guide Shaft Bracket
Cap Screw
Guide-Bearing
Cap Screw
Eccentrics
Figure 1. Blade support assembly.