Filter
Top Products
-62-
Model G0740 (Mfg. Since 11/12)
SECTION 5: ACCESSORIES
ACCESSORIES
order online at www.grizzly.com or call 1-800-523-4777
T23962—ISO 68 Moly-D Machine Oil, 5 gal.
T23963—ISO 32 Moly-D Machine OIl, 5 gal.
Moly-D oils are some of the best we've found for
maintaining the critical components of machinery
because they tend to resist run-off and maintain
their lubricity under a variety of conditions—as
well as reduce chatter or slip. Buy in bulk and
save with 5-gallon quantities.
Figure 92. ISO 68 and ISO 32 machine oil.
T23963
T23962
T10439—4 Pc. Carbide Insert CCMT Boring
Bar Set
These right-hand indexable solid steel Boring
Bars use
1
⁄4" and
3
⁄8", 80° diamond inserts and
feature a negative 7° end and side cutting angle.
Includes
3
⁄8" x 6",
1
⁄2" x 7",
5
⁄8" x 8", and
3
⁄4" x 10"
boring bars. Set comes with Torx
®
wrenches and
fitted aluminum case with handle.
Figure 94. Carbide Insert CCMT Boring Bar Set.
T10295—7 Pc. Indexable Carbide Set 5/8"
This 7-piece turning tool set is ideal for just about
any project. Supplied with right hand and left
hand turning/facing tool holders, the set is com-
plimented with one threading and cut-off tool too.
Indexable inserts ensure cutting surfaces stay
sharp.
Figure 93. 17-Pc. Indexable Carbide Tool Set.
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.