Filter
Top Products
&
'
'
'"&
'"'
'"(
(
)
*
+
,
-
."&
.
''
'%
&.
&-
&%
&&
&'
&'
&'
&'
&(
&(
&(
&)
&*
'&
DEI>DC6AHI6C9
HDA9H:E6G6I:AN
SPECIFICATIONS
MOTOR: 1 HP, 220V, SINGLE-PHASE
MOTOR AMPS: 8A
MOTOR SPEED: 1200 RPM
SHAFT SIZE W/THREAD: 8" X 7/8"
TOTAL SHAFT LENGTH: 11-3/4"
WRENCH SIZE: 1-3/8" (2)
SPACERS: 1"(4), 1-1/2"(4), 2"(2)
WEIGHT: 78 LBS.
MODEL G4787
INDUSTRIAL BUFFING MACHINE
TO REDUCE RISK OF SERIOUS INJURY WHEN USING THIS MACHINE:
1. READ AND UNDERSTAND MANUAL BEFORE STARTING.
2. ALWAYS WEAR EYE PROTECTION AND A RESPIRATOR!
3. PLUG POWER CORD INTO GROUNDED OUTLET ONLY.
4. NEVER PLACE HANDS ON ROTATING BUFFING WHEEL.
5. DO NOT WEAR LOOSE CLOTHING, GLOVES OR JEWELRY.
SECURE LONG HAIR AND BUTTON ALL LONG SLEEVE SHIRTS.
6. DISCONNECT POWER PRIOR TO CHANGING WHEELS,
OR ADJUSTING.
7. DO NOT OPERATE UNDER INFLUENCE OF DRUGS OR ALCOHOL.
8. MAKE SURE MACHINE IS PROPERLY ADJUSTED AND SET UP
CORRECTLY BEFORE STARTING MOTOR.
9. MAKE SURE MACHINE IS SECURED TO A STABLE SURFACE
BEFORE STARTING.
10. KEEP A FIRM GRIP ON THE WORKPIECE.
11. ENSURE ANY LARGE WORKPIECE IS PROPERLY SUPPORTED
THROUGHOUT THE BUFFING OPERATION.
12. DO NOT USE WORKPIECES WITH NAILS, LOOSE KNOTS, LARGE
SPLINTERS OR ANY CONDITION THAT MAY CAUSE WHEEL TO
GRAB AND PROJECT WORKPIECE.
Manufactured for Grizzly in Taiwan
Date
Serial Number
#(
G4787 Breakdown