Filter
Top Products
-8-
G8030 3 H.P. Overarm Router
Unpacking
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Overarm Router Unit
• Fence
• Hardware Box
The G8030 Hardware Box contains:
Hardware Qty
Brake Handle 1
Spacer Set 18
Draw Bar 1
Draw Nut 1
Spindle Wrench Set 1
Safety Guard 1
Safety Guard Shaft 1
Starting Pins 3
Hold Downs 4
Hold Down Bars 2
Hold Down Brackets 4
3
⁄8"-16 x 1" Hex Bolts 3
3
⁄8" Lock Washers 3
5
⁄16"-18 x 1" Flat Head Screws 4
5
⁄16
"-18 x
3
⁄4
" Flat Head Screws 2
5
⁄16" Flat Washers 4
5
⁄16" Hex Nuts 6
Handle For Hand Wheel 1
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or, for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts,
please refer to the detailed illustrations at
the end of the manual.
The Model G8030 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you’ve signed for
delivery, immediately call Customer Service for
advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G8030 is a heavy
machine, 683 lbs. ship-
ping weight. DO NOT
over-exert yourself
while unpacking or
moving your machine –
you will need assis-
tance and power equip-
ment. Serious personal
injury may occur if safe
moving methods are not
followed.
Make sure floor structure
is capable of supporting
the combined weight of
the machine parts and
people.
NOTICE
Save all containers and packing materials
until you are satisfied that your Model
G8030 has arrived in good condition.
Freight company adjusters will want to
inspect those materials in the event that a
freight claim must be made.