Grizzly G8030 Router User Manual


 
-7-
G8030 3 H.P. Overarm Router
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Model G8030
Overarm Router. The Model G8030 is part of a
growing Grizzly family of fine woodworking
machinery. When used according to the guide-
lines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G8030 is intended for heavy-duty pro-
fessional use. It features a 3 H.P., 220V single-
phase motor and magnetic power switching, as
well as a precision-ground cast iron table, a brake
lever, a foot control for the vertical spindle move-
ment and a front mounted switch. The Model
G8030 operates at 20,000 R.P.M., giving you
clean and smooth cuts.
A wide variety of router bits for the Model G8030
are available. Please refer to the current Grizzly
catalog for more information.
We are also pleased to provide this manual with
the Model G8030. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms that
you feel we should address in our next printing,
please write to us at the address below:
Grizzly Industrial, Inc.
C
O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227
Commentary
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
After Fall 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G8030 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep it
for reference.
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and
it’s operation before
beginning any work.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.