Filter
Top Products
Introduction
Features include a pistol grip with trigger switch,
forward and reverse switch and
1
⁄4" NPT female
air inlet. The
1
⁄2" chuck accepts drill bits down
to
1
⁄64" and includes a chuck key. The auxiliary
handle can be positioned anywhere around the
drill body.
Inventory
A. Air Drill ........................................................ 1
B.
1
⁄4" NPT Quick Connect Fitting (male) ........ 1
C. Chuck Key .................................................. 1
D. Handle ........................................................ 1
E. Lock Collar ................................................. 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in Figure 2. Otherwise, lubri
-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in Figure 3
.
MODEL H6139
1
⁄2" REVERSIBLE AIR
DRILL
INSTRUCTION SHEET
Figure 1. Model H6139.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#KM7955 PRINTED IN CHINA
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service.
EXPLOSION HAZARD!
Never exceed 120 PSI.
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2. Installing your tool.