Filter
Top Products
Specifications
Drive Size ........................................................
3
⁄8"
Free Speed ..........................................7,000 rpm
Maximum Torque .................................. 145 ft/lb.
Air Inlet ....................................................
1
⁄4" NPT
Average Air Consumption .......................... 4 cfm
Weight ......................................................3.3 lbs.
Inventory
A. Impact Wrench ........................................... 1
B. Oil Bottle ..................................................... 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in Figure 2
.
Otherwise, lubricate multiple times daily with 2–3
drops of pneumatic tool oil. Insert the oil directly
into the air fitting as shown in Figure 3
.
MODEL H8119
3
⁄8" IMPACT WRENCH
w/FRONT EXHAUST
INSTRUCTION SHEET
Figure 1. Model H8119.
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © JANUARY, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR8963 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury.
INJURY HAZARD!
When servicing, always dis
-
connect tool from air to pre
-
vent unexpected operation.
120 PSI
MAX AIR PRESSURE!
Exceeding this PSI may
result in injury/tool damage.
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2. Installing your tool.