Grizzly T25449 Dust Collector User Manual


 
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T25448/T25449
DUST COLLECTOR
REMOTE SWITCH
INSTRUCTIONS
COPYRIGHT © FEBRUARY, 2013 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
FOR MODELS MANUFACTURED SINCE 8/13 #TS15583 PRINTED IN TAIWAN
Introduction
The Model T25448/T25449 Dust Collector
Remote Switch (Figure 1) allows you to remotely
turn a dust collector ON/OFF from a distance of
up to 75 feet.
Read and understand this entire document before
installation to make sure this switch box fits the
intended application.
To ensure safe operation:
• Only connect the switch box to power sup-
ply that meets the listed specifications.
• Do not connect the switch box to a dust
collector with a motor that exceeds the
listed specifications.
Specifications
Model T25448:
Power Supply ....................120V, 15A, 60 Hz
Outlet Type .................................NEMA 5-15
Max. Dust Collector HP ..................... 1.5 HP
Model T25449:
Power Supply ................... 240V, 20A, 60 Hz
Outlet Type .................................NEMA 6-20
Max. Dust Collector HP ........................ 3 HP
Remote Battery ..........................Type 23AE, 12V
Communication Type ........Radio Frequency (RF)
Max. Communication Distance ................... 75 ft.
• This remote switch is ONLY designed to
be used on dust collectors with standard
ON/OFF toggle or push-button switches—
not with magnetic switches.
• If you are unsure about the type of dust
collector switch you have, contact the dust
collector manufacturer for more informa-
tion.
Using this switch box for applications
other than dust collectors may cause the
unit to fail and will void the warranty.
Replacement remote controllers (Model
T25507) can be purchased by contacting
Grizzly at (800) 523-4777. Before the new
remote controller can be used, the switch
box must be programmed to work with it
(refer to Programming Switch Box on Page
2 for detailed instructions).
Figure 1. Model T25448/T25449 remote switch
components.
Switch
Box
Remote
Controller