Filter
Top Products
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T25554/T25555
EXTENSION BLOCK KIT
INSTRUCTIONS
COPYRIGHT © MAY, 2012 BY GRIZZLY INDUSTRIAL, INC. REVISED APRIL, 2013 (TR)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MANUFACTURED SINCE 4/13) #KN15002 PRINTED IN TAIWAN
Introduction
This Extension Block Kit increases the maximum
cutting height of the Model G0555LX/G0555LANV
14" bandsaw from 6" to 12".
The T25554 matches the black color scheme of
the G0555LANV. The T25555 matches the green
color scheme of the G0555LX.
Figure 1. T25555 Extension Block Kit.
A
B
E
D
F
C
Description Qty
A. Extension Block .......................................... 1
B. Saw Blade 105" .......................................... 1
C. Extended Saw Blade Guard ....................... 1
D. Extended Guide Post ................................. 1
E. Hardware
—Hex Bolt 5/8"-11 x 8-1/2 ......................... 1
—Hex Nut 5/8"-11 ....................................... 1
—5/8" Flat Washer ..................................... 2
—Cord Clamp ACC-3 (not shown) ............. 1
—Phillips Hd Scr 10-24 x
1
⁄2" (not shown) .. 1
F. Extended Blade Guard Assembly .............. 1
Inventory
Items Needed
Qty
Adjustable Wrenches ....................................... 2
Phillips Screwdriver #2 ...................................... 1
Hex Wrench 5mm and 3mm ....................1 Each
Another Person for Assistance .......................... 1
Cleanup
The unpainted surfaces of the extension block are
coated with a heavy-duty rust preventative that
prevents corrosion during shipment and storage.
Complete removal of the rust preventative is nec-
essary for the extension block and upper arm to fit
properly and be accurately positioned.
Before cleaning, gather the following:
• Disposable Rags
• Cleaner/degreaser (WD•40 works well)
• Safety glasses & disposable gloves
• Plastic paint scraper (optional)
Basic steps for removing rust preventative:
1. Put on safety glasses.
2. Apply a liberal amount of cleaner/degreaser
on the rust preventative, then let it soak for
5–10 minutes.
3. Wipe off the surfaces. If your cleaner/
degreaser is effective, the rust preventative
will wipe off easily. If you have a plastic paint
scraper, scrape off as much as you can first,
then wipe off the rest with the rag.
4. Repeat Steps 2–3 as necessary until clean,
then coat all unpainted surfaces with a quality
metal protectant to prevent rust.
NOTICE
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.