Filter
Top Products
Grinder Brush Kit
(7 Pieces)
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No
portion of this sheet may be reproduced in any shape or form without
the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product.
Save the receipt and these instructions. It is important that you read this
entire instruction sheet to become familiar with these products before you begin
using them.
Technical Specifications
MAX. RPM = 12,500
5
/
8
”x 11 TPI Arbor
These wheels and brushes,
made from crimped carbon steel wire,
are to be used with an appropriate angle
grinder. They can be used for
roughening, deburring, cleaning prior to
welding, rust and paint removal, and weld
spatter and corrosion removal.
1. Always wear ANSI approved safety goggles, full face shield and respirator
when working with these tools.
2. BEFORE use, read and adhere to all warnings, safety precautions, and
operating instructions in the owner’s manual for the appropriate angle grinder
these accessories are to be used with.
2. The brush and wheel bristles are very sharp and can easily
cause skin cuts and puncture wounds; be extemely careful when unpacking
these products and when handling and using the wheels and brushes.
Always wear gloves when handling and using these wire brushes.
3. Exposure to aluminum oxide (a dust generated from material
removing processes) can result in eye, skin and breathing irritation. Always
use a NIOSH (National Institute for Occupational Safety and Health)
approved respirator and safety goggles. Avoid skin exposure. Proper
ventilation in the work area is required.
4. Never exceed the 12,500 RPM maximum.
Safety Warnings and Instructions
SAVE THESE WARNINGS.
ITEM
90976
®
01/04
Made in China.
:gniwollofehtsedulcnitesehT
x"3-2
1
/
4
"eriWdettonKhsurBpuC
"3x -2
1
/
4
"eriWdepmirChsurBpuC
"4x
3
/
4
"tsiwTelbaCleehWeriW
"4x
3
/
4
"daeBregnirtSleehWeriW
5
/
8
retpadA52.1-01Mot"
5
/
8
retpadA05.1-01Mot"
hsurBeriWwoR61x4
eldnaHdooWhtiw