Filter
Top Products
SKU 95668 For technical questions, please call 1-800-444-3353 PAGE 4
in. Plugging in power equipment with the Power Switch on, invites accidents.
5. Remove adjusting keys or wrenches before turning the power tool on. A
wrench or a key that is left attached to a rotating part of the Wood Shaper may
result in personal injury.
6. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the Wood Shaper in unexpected
situations.
7. Use safety equipment. Always wear ANSI-approved safety impact
eye goggles. Dust mask or respirator, and hearing protection must be
used for appropriate conditions.
TOOL USE AND CARE
1. Do not force the Wood Shaper. Use the correct tool for your application.
The correct tool will do the job better and safer at the rate for which it is designed.
2. Do not use the Wood Shaper if the Power Switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and must
be replaced.
3. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Wood Shaper. Such
preventive safety measures reduce the risk of starting the tool accidentally.
4. Store idle tools and equipment out of reach of children and other untrained
persons. Tools and equipment are dangerous in the hands of untrained users.
5. Maintain this product with care. Keep the Wood Shaper and its Table clean
and in proper working order. Properly maintained tools and equipment are
easier to control. Do not use damaged tools and equipment. Tag damaged tools
and equipment “Do not use” until repaired.
7. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become
hazardous when used on another product.
6. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the Wood Shaper’s operation. If
damaged, have the tool serviced before using. Many accidents are caused
by poorly maintained tools.