Harbor Freight Tools 90692 Lathe User Manual


 
SKU 90692 PAGE 4
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors, which cannot be
built into this product, but must be supplied by the operator.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. This Lathe Duplicator Attachment is designed for use ONLY with the Lathe
Model 90265 (available from Harbor Freight Tools). Make sure to read and
understand all instructions and safety precautions as outlined in the manu-
facturer’s manual for the Model 90265 Lathe with which the Lathe Duplicator
Attachment will be used.
2. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, oil, grease, trash, and other debris.
3. Keep all safety guards in place, in proper adjustment, and in proper align-
ment.
4. Prior to starting the Lathe and Lathe Duplicator Attachment, make sure all
adjusting keys and wrenches are removed from the equipment.
5. Never adjust the Lathe Duplicator Attachment while it is running. Turn off
and unplug the Lathe from its electrical outlet. Wait until the Lathe comes to a
complete stop before performing any adjustments.
6. Protect hands and fingers from possible injury. Keep hands and fingers
away from the chuck, centers, and other moving parts.
7. Wear eye, face, and hearing protection. Always wear an ANSI approved full
face safety shield and ANSI approved hearing protectors when using the Lathe
Duplicator Attachment. Wear ANSI approved dust masks or a respirator if the
work performed creates excessive dust.
8. Never leave the Lathe Duplicator Attachment unattended while it is running.
Turn off the electrical power to the Lathe, and do not leave the Lathe Duplicator
Attachment until the Lathe comes to a complete stop.
9. Never stand on the Lathe Duplicator Attachment. Serious injury could occur if
the equipment is tipped or if the sharp centers are accidentally contacted.
10. Keep the Cutting Tool sharp and dry for better and safer performance.