Filter
Top Products
SKU 90692 PAGE 7
U-BRACKET (38)
HANDLE (3)
PATTERN SUPPORT BAR (41)
PATTERN BOLT (42)
LOWER VERTICAL
SUPPORT BAR
(46)
U-BRACKET
ASSEMBLY
LOWER VERTICAL
SUPPORT BAR
(46)
U-BRACKET
ASSEMBLY
FIGURE C
To Attach The Support Bar:
1. Remove the End Cap (12) from each end of the Support Bar (54).
(See Assy. Diagram.)
2. Remove the two Square Nuts (47) from the Handles (48), and insert the Square
Nuts into the T-Slot of the Support Bar (54).
(See Figure D, next page.)
3. Insert the threaded, bolt portion of the Handles (48) through the Lockwashers
(34), Flat Washers (40), and holes in the Lower Vertical Support Bars (46). Then,
screw the threaded, bolt portion of the Handles into the two Square Nuts (47) on
the Support Bar (54).
(See Figure D.)
4. Replace the End Cap (12) on each end of the Support Bar (54).
(See Assy. Diagram.)