Filter
Top Products
® U.S. Registered Trademark
Copyright © 2000 Honeywell • • All Rights Reserved
INSTALLATION INSTRUCTIONS
69- 1448
W8600A AIR
WATCH™
Indicator
APPLICATION
The W8600A is available for use with Honeywell media
or electronic air cleaners.
The W8600A function indicator panel has four liquid
crystal display (LCD) arrowheads that point to Battery, Air
Cleaner, UV Air Treatment, and Humidifier. (See Fig. 1.)
A blinking arrowhead indicates service is needed.
Fig. 1. W8600A AIR
WATCH™
Indicator features.
INSTALLATION
Location
The W8600A is designed to blend with the latest T8600
family of Honeywell Chronotherm® IV Thermostats. The
W8600A can also be mounted at any other convenient
location in the living area of the home. See Fig. 2.
Fig. 2. W8600A mounting location.
Mounting
These mounting instructions assume that the W8600A is
mounted next to a T8600 Thermostat. When installing at
another location, modify the procedure to fit the
installation:
1.
Remove the W8600A from the base.
2.
Mark the holes for the mounting screws (provided)
using the base as a template. See Fig. 3.
3.
Drill the holes.
4.
Position the base over the holes and install the
screws.
5.
Tighten the screws until the base is mounted firmly
on the wall.
6.
Replace the W8600A onto the base.
Fig. 3. Using base as mounting template.
Battery
TM
Air Cleaner
UV Air Treatment
Humidifier
Honeywell.com/yourhome
FUNCTION
INDICATOR
PANEL
LCD
RESET BUTTON
M14696
Battery
T
M
Air Cleaner
UV Air Treatment
Humidifier
H
o
n
e
y
w
e
ll.c
o
m
/y
o
u
r
h
o
m
e
M14697
Wake
Room
S
y
s
t
e
m
F
a
n
H
e
a
t
A
u
t
o
A
M
DST
Tue
M14695
THERMOSTAT
WALLPLATE
MOUNTING HOLES (2)
WIRING HOLE
W6800A BASE