Filter
Top Products
52
Post Hole Diggers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
HD25 and HD35 Hydraulic Series
HD25
(3-Point)
HD25
(Bucket Mount)
HD35
(3- Point)
HD35
(Bucket Mount)
Hydraulic Hoses
Standard Optional Standard Optional
Maximum Auger RPM
109 RPM 105 RPM 109 RPM 105 RPM
Gallons Per Minute Rating
5 -12 GPM @ 1500 to 3000 PSI 10 -25 GPM @ 1500 to 3000 PSI
Max torque @ 2500 PSI
700 ft. lbs. 1605 ft. lbs.
Weight with 6” Auger
235 lbs. 185 lbs. 235 lbs. 189 lbs.
Auger Length
48”
Auger Flighting Thickness
1/4”
Auger Pipe
2 1/2” dia.
Auger Teeth
Forged, Individually Replaceable
40 Degree Angle Installed on Flat Side
50 Degree Angle Installed on Angled Side
Number of Teeth
(6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth)
Pilot Cast steel, 3 drill points
Auger Drive
Hydraulic
Gearbox
3.18:1 Ratio
Output Shaft on Gearbox
2” O.D. Round
Hitch
Cat I or II Bucket Mount Cat I or II Bucket Mount
Yoke
2 7/8” Tubing Not Applicable 2 7/8” Tubing Not Applicable
Boom
Reinforced Tubing Not Applicable Reinforced Tubing Not Applicable
Options and Accessories
Auger Sizes
6”, 9”, 12”, 15”, 18” or 24”
Hydraulic Hoses
Not Applicable (2)-24 ft. long hoses Not Applicable (2)-24 ft. long hoses
Hydraulic
Down Pressure Kit
Available Not Applicable Available Not Applicable
Storage Stand
Available Not Applicable Available Not Applicable
Auger Extensions
7” and 14” Extensions Available
317-076S continued on next page
2/03/09