Lightolier LDS Series Work Light User Manual


 
12.67”
(
32.69 cm)
8
.5”
(
21.6 cm)
1
.87”
(
4.7 cm)
5
.5”
(13.97 cm)
4
.38”
(
11.1 cm)
.63”
(1.6 cm)
Standard Canopy
Lightolier a Genlyte Company
www
.lightolier
.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
W
e r
eser
ve the right to change details of design, materials and finish.
© 2006 Genlyte Gr
oup LLC (Lightolier Division) •
C0806
LDS Series LED Exit Sign LDS
Page 1 of 1 Die-Cast Aluminum Housing
J
ob Inf
ormation Type:
J
ob Name:
Cat. No.:
Lamp(s):
Notes:
Features
1. Illumination: Illumination is accomplished with long lasting, high output
Light Emitting Diodes (LEDs). Hot spots and striations are eliminated by the
internal light chamber allowing even illumination in normal and emergency
situations.
2. Housing: Rugged die cast aluminum housing, back plate, faces and canopy.
Exits are painted with a durable powder coating in a variety of colors to suit
any décor.
3.
Installation:
Exit installation methods ar
e universal. Universal models ar
e
supplied with two faces, back plate and canopy to easily facilitate back wall
mount, ceiling and end mount. NFPA approved directional chevron knockouts
are supplied on the faces. A universal knockout pattern is supplied on the
back plate to accommodate back wall mount applications.
4.
Electr
onics:
120/277 V
AC, 60 Hz, dual voltage input. Solid state cir
cuitry is
surge-protected and provides for a reliable charging system. Standard
features include low voltage disconnect, labor saving AC lockout, brownout
protection and instantaneous transfer. All circuitry is conformal coated with a
moisture resistant protector.
5. Optional Self-Testing Diagnostics: The diagnostics routine is activated
upon the pr
esence of AC power to ensur
e pr
oper installation and
initialization. Continuous monitoring of the systems critical components
include: Battery disconnect/failure, charger failure, LED failure, AC line
voltage monitoring and transfer cir
cuit failur
e. Fault/ser
vice monitoring is
accomplished via a dual color LED on the outside of the unit so there is no
need to open the fixture if troubleshooting is needed. The self-test routine
satisfies the exception clause for periodic testing requirements of NFPA 101
and automatically tests the unit for one minute every thirty days, 30 minutes
on the sixth month and 90 minutes annually.
6.
Batter
y:
Sealed, maintenance-fr
ee nickel cadmium batter
y
. Supplies a
minimum of 90 minutes of power in the emer
gency mode. Estimated service
life of ten years.
7. Input Power Requirements: Emergency Operation - Red: 2.88 W; Green:
3.36 W
8. Operating Temperature Range: Damp location listed: 50° F (10° C) to
104° F (40° C).
9. Emergency Electrical Specifications: Red LED Signs: 120 VAC, 60 Hz,
0.024 A; 277 VAC, 60 Hz, 0.011 A; Green LED Signs: 120 VAC, 60 Hz, 0.028 A;
277 VAC, 60 Hz, 0.012 A
10.Warranty: Five year full warranty.
Code Compliance
UL 924 listed. UL damp location listed. Energy Star compliant. NFPA 101, IEC,
NEC, OSHA illumination compliant.
Accessories
WG4 = Wall Mount Exit Wire Guard
PKIT12W = Pendant Kit, 12” white finish
PKIT12B = Pendant Kit, 12” black finish
NOTE: Consult factor
y for additional lengths.
LDS
NU
S
ERIES BATTERY STENCIL LETTER STENCIL FACE/ FACTORY-INSTALLED
F
ACES COLOR HOUSING COLOR OPTION
LDS = Die Cast Aluminum
L
ED Exit
A = AC Only
N
= Nickel Cadmium
1 = Single Face
U
= Universal, 2 Faces
and Backplate
R = Red
G
= Green
A
= Natural Brushed Aluminum Face w/ Black
H
ousing
B = Black Stencil Face w/ Black Housing
W = White Stencil Face w/ White Housing
N = Natural Brushed Aluminum Face w/ Natural
Brushed Aluminum Housing
WA = Natural Brushed Aluminum Face w/ White
Housing
F
ront View
S
ide View
The LDS Series die cast aluminum exit sign combines traditional styling with reliable self-testing, self-diagnostic technology (optional) ensuring the readiness of your
emergency lighting and satisfying the periodic testing requirements of NFPA 101, Life Safety Code.
Complete Fixture consists of base exit sign. Select accessories below.
How to Specify:
S
D = Self-Testing
D
iagnostics
(Available on nickel cadmium,
universal face exits only - LDSNU)