Filter
Top Products
Speed changeover
.To change the speed, turn the speed
change knob
180"
while the drill
is
run-
ning. Be sure that the speed change knob
is
turned to the correct speed setting
before you begin operation. See arrow
indication. Use the right speed for the
job.
Fastening torque adjustment
Just turn the fastening torque adjust
knob on the tool in order to select any of
5
different fastening torques. Make sure
that the arrow points to the right torque
before you begin the job. Torques are
numbered from
1
to
5
in the order of
strength.
Set
to
5
for use
as
a
drill. The
torque setting for number
5
is
designed
for drilling, and to protect the motor
from burn out,
so
it
can slip when
a
very
high torque
is
applied.
Fastening torque
adjust knob
I
Arrow
Grip
.The grip shown on the right
is
recom-
mended. However, grip the tool firmly
with both hands when drilling
a
large-
diameter hole.
10