Filter
Top Products
Screwdriving operation
Place the point of the driver bit
in
the
screw head and apply pressure
to
the
tool.
Start the tool slowly and then increase the
speed gradually. Release the trigger just as
the screw bottoms
out.
The electric brake
will then stop the
tool
immediately, pre-
venting the screw and/or bit from being
damaged.
When driving wood Screws, predrill pilot
holes to make driving easier and to pre-
vent splitting
of
the workpiece. See the
chart.
Nominal diameter
of
wood screw
(mm)
3.1 (1/8")
3.5 (9/64")
3.8 (5/32")
Recommended size
of
pilot
hole
(mm)
2.0
-
2.2
(5/64"
-
3/32")
2.2
-
2.5
(3/32"
-
3/32")
2.5
-
2.8
(3/32"
-
7/64")
I
3.1
-
3.4
(1/8"
-
9/64")
4.8 (3/16')
5.1 (13/64")
5.5 (7/32") (9/64"
-
5/32")
Overload protector
The overload protector automatically cuts out to break the circuit whenever heavy work
is prolonged. Wait
20-30
seconds before resuming operation.
*
10