Filter
Top Products
Installing or removing driver
bit
or drill
bit
CAUTION
:
Always be sure that the tool
is
switched off and the battery cartridge
is
removed before
installing or removing the bit.
To
install the bit, push the
sleeve
up to-
ward the "FREE" side and turn the
sleeve
counterclockwise while holding the ring
with your other hand
as
illustrated
at
right.
Place the bit in the chuck
as
far
as
it
will
go. Hold the ring firmly and turn the
sleeve
clockwise to tighten
the
chuck. Then push
the
sleeve
down toward the "LOCK' side.
See illustration.
I
FREE
side
To remot
counterclockwise while holding the ring with your other hand.
the bit,
push the
sleeve
up toward the "FREE' side and turn the
sleeve
CAUTION
:
0
Do
not attempi to turn the sleeve forcibly when the
sleeve
is
in the "LOCK" position.
The
sleeve
may be damaged.
.Always push the
sleeve
down toward the "LOCK' side before operation. If you operate
the tool with the
sleeve
in the "FREE" position, the chuck may loosen and the bit may
come out unexpectedly.
7