Filter
Top Products
Switch action
Tool
speed
is
increased by increasing pres-
sure on the trigger.
To
start the tool, simply
pull the trigger.
Release
the trigger to stop.
7
CAUTION
:
Before inserting the -attery cartridge into the tool, always check to
see
that the trigger
switch actuates properly and returns to the
"OFF"
position when released.
Reversing switch action
This tool has
a
reversing switch to change
the direction of rotation. Slide the revers-
ing switch to the left for clockwise rota-
tion or to the right for counterclockwise.
CAUTION
:
.Always check the direction of rotation before operation.
0
Move the reversing switch only after the tool comes to
a
complete stop. Changing the
direction of rotation before the tool stops may damage the tool.
Speed change
To change the speed, slide the speed change
lever to the
"H"
side for high speed or
"L"
side for low speed.
To
slide the speed
change lever easily, pull the trigger slightly
while pushing the speed change lever. Be
sure that the speed change lever
is
set
to
the correct position before operation. Use
the right speed for your
job.
\,Speed
change
lever
CAUTION
:
Always
set
the speed change lever fully into the correct position. If you operate the tool
with the speed change lever positioned halfway between the
"H"
side and
"L"
side, the
tool may be damaged.
8