Makita HR2450 Power Hammer User Manual


  Open as PDF
of 2
 
Versatile 2kg Rotary Hammers
Comparison of Drilling Efficiency
Note:
1. It may differ under some conditions.
2. Numbers in the charts below are relative values when the capacities of Makita "HR2450"
are indexed at 100.
Test conditions: Drilled in concrete with compressive strength of 40N/mm
2
.
Bit diameter: 10.5mm
90 100 110 120
fastslow
Makita HR2470
Makita HR2450
110
110
Competitor "H"
100
100
Competitor "B"
105
105
100
100
0
Bit diameter: 16.5mm
90 100 110 120
fastslow
Makita HR2470
Makita HR2450
105
105
Competitor "H"
110
110
Competitor "B"
105
105
100
100
0
Bit diameter: 12.5mm
90 100 110 120
fastslow
Makita HR2470
Makita HR2450
100
100
Competitor "H"
95
95
Competitor "B"
105
105
100
100
0
Items of standard equipment and specifications may differ by country or area.
Rotary Hammer
HR2230, HR2460/F, HR2470/F/T/FT
325
Continuous rating Input
Capacity
Concrete : (with diamond core bit)
Concrete : (with T.C.T. bit)
Steel :
Wood :
Impacts per minute
No load speed
Dimensions
Net weight
Power supply cord
HR2230
710W
65mm (2-9/16")
22mm (7/8")
13mm (1/2")
32mm (1-1/4")
0-4,050ipm
0-1,050rpm
357 x 84 x 214mm
14"x 3-5/16"x 8-3/8"
2.4kg (5.4lbs)
4.0m (13.1ft)
HR2460/F
780W
65mm (2-9/16")
24mm (15/16")
13mm (1/2")
32mm (1-1/4")
0-4,500ipm
0-1,100rpm
362 x 84 x 214mm
14-1/4"x 3-5/16"x 8-3/8"
2.5kg (5.6lbs)
4.0m (13.1ft)
HR2470/F
780W
65mm (2-9/16")
24mm (15/16")
13mm (1/2")
32mm (1-1/4")
0-4,500ipm
0-1,100rpm
370 x 84 x 214mm
14-1/2"x 3-5/16"x 8-3/8"
2.6kg (5.9lbs)
4.0m (13.1ft)
HR2470T/FT
780W
65mm (2-9/16")
24mm (15/16")
13mm (1/2")
32mm (1-1/4")
0-4,500ipm
0-1,100rpm
394 x 84 x 214mm
15-1/2"x 3-5/16"x 8-3/8"
2.8kg (6.3lbs)
4.0m (13.1ft)
Standard Equipment
Quick Change Drill Chuck (HR2470T/FT only), Depth Gauge, Side Grip (Tool does not come with bit.)
Double Insulation
Variable Speed
Reversing
Torque Limiter
Dust Collecting
SDS-Plus Shank
Carrying Case
Built-in Job Light
(HR2460F, HR2470F/FT only)
DRASTICALLY
ENHANCED
DURABILITY
Hi-Spec 2kg Rotary Hammers
PRINTED IN JAPAN Z15211-2 2007-07
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
Satisfy Professional's Needs
Rotary Hammers
HR2230 22mm (7/8") HR2460/F 24mm (7/8")
HR2470/F/T/FT 24mm (7/8") "Combination Hammers"
SDS-Plus Shank