Filter
Top Products
| 325
U; I U; I
t
t
E 130 3,25 mm 1,5–5 mm** • • – • • •
E 150 3,25 mm* 1,5–5 mm**
• • – • • •
E 170 Si 4,0 mm 1,5–5 mm** • • – • • •
SK 200 5,0 mm 2,5–6 mm • • – – – –
SK 230 5,0 mm 2,5–7 mm • • – – – –
SB 140 3,25 mm 2,5–4 mm • • – – – –
SB 200 CT 4,0 mm 2,5–5 mm • • – – – –
TIG welding
Device type Weldable Weldable materials
Material
thickness Steel Stainless steel (VA) Nonferrous heavy metals Aluminium
TIG 170 DC 0,3–6 mm
• • • –
TIG 170 AC/DC 0,3–6 mm
• • • •
MIG/MAG welding
Device type Weldable Weldable Weldable materials
wire Material
thickness Steel Stainless steel (VA) Aluminium
MIG/MAG 140 0,6–0,8 mm 0,5–3 mm
• • *
MIG/MAG 160 0,6–0,8 mm 0,5–4 mm
• • *
MIG/MAG 150/20 XT 0,6–0,8 mm 0,5–5 mm
• • •
MIG/MAG 170/30 XTC 0,6–0,8 mm 0,5–6 mm
• • •
MIG/MAG 200/40 XT 0,6–1,0 mm 0,5–8 mm • • •
MIG/MAG 250/60 XT 0,6–1,2 mm 0,5–10 mm • • •
MIG/MAG 300/45 XT 0,6–1,2 mm 0,5–15 mm • • •
Note: The specified material thickness values are only standard values.
Thicker materials can naturally also be processed by appropriate
seam preparation and multi-layer structure of the weld seam.
SINUS INVERTER TECHNOLOGY.
No oversized current generators
due to the reduced power con-
sumption.
Welding gaps that can be caused
by long cable extensions, are a
thing of the past.
Future standards are already
met today.
An optimisation of the output factor
is achieved using the sinus-inverter
techno logy by Metabo. This means
that a higher output is possible with
lower current consumption from the
230 V energy supply.
Advantages:
High welding output at 230 V
(electrode up to 170 A).
* Cr Ni up to 4.0 mm ** TIG from 0.3 mm on *** except aluminium
Standard inverter
Sinus inverter
Loss Output
* conditionally applicable
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
WELDING TECHNOLOGY
ficiently. Example: The innovative sinus inverter techno-
logy by Metabo. High welding output but low fuel con-
sumption. Or the microprocessor control – we call it
“Smart Intelligence” – with state-of-the-art electronics
for ideal welding results.
Electrode welding
Device type Max. Ø Weldable Weldable materials with electrode Weldable materials with TIG
Electrodes Material Steel Stainless Aluminium Steel Stainless Nonferrous
thickness steel (VA) steel (VA) heavy metals***
Which welding device is suitable for which material?