Filter
Top Products
. A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 13
3-5. Installing Work Clamp
1 Work Cable
2 Boot
Route cable through front panel
opening. Slide boot onto work
cable.
3 Negative (−) Output Terminal
Connect cable to terminal and
cover connection with boot.
Close door.
803 540-B
Tools Needed:
3/4 in
3
2
1
3-6. Installing Welding Gun/Cable Holder
1 Welding Gun/Cable Holder
2 Wrapper
3 Slots
Angle holder to insert hook through
bottom slot. Drop holder down so
that hook exits top slot.
Ref. 803 545-B / Ref. 803 539-B
1
2
3