Mitsubishi Electronics CMY-R100VBK Welding System User Manual


  Open as PDF
of 4
 
Job Name: Location:
Drawing Reference: Schedule No.
System No.: Date:
Outdoor Unit: 16-TON PURY-P192TSHMU-A-BS
(Consists of Two PURY-P96THMU-A-BS and One CMY-R100VBK Twinning Kit)
OutdOOr VrFZ HEAt rEcOVEry SyStEM FEAturES
• 3-phase, 208/230V systems
• Modular variable refrigerant ow zoning (VRFZ) systems;
smaller capacity units can be piped together to form a single,
large-capacity two-pipe system
• Compact size for each outdoor module; can be transported
through standard-sized doorways for installation
• Required Twinning Kit allows for easy eld piping connection
• Selectable fan static, 0.12 or 0.24"WG external static
pressure; factory set to 0"WG
• Max. Total Refrigerant Piping Length: 1,804' (P72,96); 1,969'
(P120,144,168); 2,461' (P192); 2,625' (P216,240); Max.
Line Length: 541'; Max. Control Wiring Length: 1,650'
• Connects to CITY MULTI indoor units; controlled via
CITY MULTI Controls Network (CMCN)
• External finish: Pre-coated Galvanized-steel Sheets with
thermoset polyester-resin
• Operating Temperature Range
Cooling (Outdoor): 23° ~ 109°F (-5° ~ +43°C) DB
Heating (Outdoor): -4° ~ +60°F (-20° ~ +16°C) WB
** Each individual module requires a separate electrical connection. Reference electrical data for each individual module.
PURY-P96THMU-A-BS
PURY-P96THMU-A-BS
OPtIONAL PArtS
□ Twinning Kit*.…………………………………...……...CMY-R100VBK
□ Branch Joint (T-Branch: ≤ 72,000 Btu/h).………….CMY-Y102S-G2
□ Branch Joint (T-Branch: 73,000-144,000 Btu/h).……….CMY-Y102L-G2
□ Joint Adapter (Port Connector>54,000 Btu/h).………….CMY-R160J
□ Main BC Controller.…………………..CMB-P108/1010/1013/1016NU-GA
□ Sub BC Controller.…………………CMB-P104/108NU-GB/-1016NU-HB
* Twinning Kit is necessary to combine the refrigerant ows of the
modules and is included in the outdoor unit set.
Specications System Module 1 Module 2
Unit Type
PURY-P192TSHMU-A-BS
PURY-P96THMU-A-BS PURY-P96THMU-A-BS
Nominal Cooling Capacity Btu/h 192,000 96,000 96,000
Nominal Heating Capacity Btu/h 200,000 108,000 108,000
External Dimensions (H x W x D) In. / mm Refer to Module Data
65 x 48-1/16 x 29-15/16 /
1,650 x 1,220 x 760
65 x 48-1/16 x 29-15/16 /
1,650 x 1,220 x 760
Net Weight Lbs. / kg 1,170 / 530 585 / 265 585 / 265
Electrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 208-230V, 3-phase, 60Hz
Cooling Power Input kW 17.04
Refer to System Data
Heating Power Input kW 15.85
Cooling Current (208/230V) A 52.5 / 47.5
Refer to System Data
Heating Current (208/230V) A 48.8 / 44.2
Minimum Circuit Ampacity
(MCA)**
A Refer to Module Data** 35 / 32** 35 / 32**
Maximum Overcurrent
Protection (MOCP)**
A Refer to Module Data** 40 / 40** 40 / 40**
Piping Diameter
Refer to System Data
From Twinning Kit to Indoor Units
(Brazed) (In. / mm)
Liquid (High Pressure) 7/8 / 22.2
Gas (Low Pressure) 1-1/8 / 28.58
From Modules to Twinning Kit
(Brazed) (In. / mm)
Liquid (High Pressure)
Refer to Module Data
3/4 / 19.05 3/4 / 19.05
Gas (Low Pressure) 7/8 / 22.2 7/8 / 22.2
Indoor Unit
Total Capacity 50 to 150% of ODUs
Refer to System Data
Model / Quantity P06 ~ P96 / 1 to 48
Sound Pressure Levels dB(A) 62.0 58.0 58.0
Fan
Refer to Module Data
Type x Quantity Propeller Fan x 1 Propeller Fan x 1
Airow Rate cFM 7,750 7,750
Direct-drive Inverter Motor Output kW 0.92 0.92
Compressor Operating Range 9% to 100% Refer to System Data
Compressor Type x Quantity
Refer to Module Data
Inverter-driven Scroll Hermetic x 1 Inverter-driven Scroll Hermetic x 1
Compressor Motor Output kW 7.0 7.0
Compressor Crankcase Heater kW 0.057 0.057
Refrigerant
Refer to Module Data
R410A
Lubricant MEL32
High-pressure Protection Device
Refer to Module Data
601 psi / 4.15 MPa 601 psi / 4.15 MPa
Compressor / Fan Protection Device Overheat Protection / Thermal Switch Overheat Protection / Thermal Switch
Inverter Protection Device Overheat / Overcurrent Protection Overheat / Overcurrent Protection
Blue Fin Anti-corrosion Protection: Cellulose- and polyurethane-resin coating treatment applied to condenser coil that protects it from air contaminants;
≥1μm to 1.5μm thick; Salt Spray Test Method - no unusual rust development to 960 hours.
next