A SERVICE OF

logo

CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
2-1/2" (63.5mm)
Max. Deck Thickness
Single Mount Esc.
7"
(178mm)
9-3/8"
(238mm)
9-5/8"
(244mm)
9-5/8"
(244mm)
Deck Escutcheon
10-7/16" x 2-7/16" wide
(256mm x 62mm)
28-1/2"
(724mm)
Colonnade®
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7575 series
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/2” (38mm) DIA.
Rev. 2/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Wand with Hydrolock® quick connect system
Pullout spray with 59" fiber hose
Flexible supplies with 3/8” compression fittings
OPERATION
Lever style handle
Temperature controlled by 100˚ arc of handle travel
Spout receptor rotation is 145˚
Operates with less than 5 lbs. of force
Operates in stream or spray mode in the pullout or retracted position
FLOW
Flow is limited to 2.2 gpm (8.3 L/min) MAX
CARTRIDGE
1255™ Duralast™ cartridge
STANDARDS
Third party certified to ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
5 year warranty if used in commercial installations
There is more than 1 version of this model.
Page down to identify the version you have.