Open as PDF
323493A-01 October 2002
2002 NationalInstrumentsCorp. All rights reserved.
FieldPoint™, National Instruments™, NI™,and ni.com™ aretrademarks of National Instruments Corporation.
Product and company names mentioned herein are trademarks or trade namesof their respective companies.
file on your CD, or
FieldPoint Operating Instructions
This document describes the wiring, mounting, and data storage
accessories available for use with National Instruments Compact
FieldPoint. To search for parts listed in this document, go to
and enter the part number in the Search field. For
accessories not listed in this document, refer to the Distributed I/O
section of the NI catalog.
Controller Wiring Accessories
NI offers several accessories for connecting to the serial ports on
the cFP-20xx controller.
DB-9 Right-Angle Cable for RS-232 Serial Port
The Compact FieldPoint RS-232 serial cable, part number
189284-02, is a DB-9 female to DB-9 male cable adapter for use
with COM 1 on the cFP-20xx controller. The right-angle connector
is well suited for low-profile applications with limited space in
front of the controller.
Figure 1. Compact FieldPoint DB-9 Cable Adapter for COM 1