National Instruments cFP-20xx Cordless Drill User Manual


 
Compact FieldPoint Accessories 8 ni.com
I/O Connector Protective Cover
NI offers a cover to protect unused slots on the backplane from
damage caused by dirt, tools, and other potential hazards. The
Compact FieldPoint protective cover is part number 778625-01.
Tighten the screws on the dust cover to 0.56 N m(5lbin.)
of torque. The nylon coating on the screws prevents them from
loosening.
Figure 7. Compact FieldPoint Protective Cover
Mounting Accessories
NI offers several accessories for mounting the Compact FieldPoint
system on a DIN rail, in a standard 19 in. instrumentation rack, or
on a panel. All Compact FieldPoint mounting accessories will
work with either the cFP-BP-4 or the cFP-BP-8.
Refer to the cFP-20xx and cFP-BP-x User Manual for instructions
on using Compact FieldPoint mounting accessories. Follow the
cooling guidelines in the cFP-20xx and cFP-BP-x User Manual
when using any of the mounting options.