Filter
Top Products
Steps 1 4
Before you start
Steps 19 20
Testing your Internet
connection
Steps 17 18
Complete your configuration
Steps 13 16
Start the wizard
Steps 9 12
Access the BSR252
Step 8
Assign TCP/IP addresses
Steps 4 7
Install the hardware
BSR252
Business Secure Router 252
Quick Install Guide
7
20
16
19
10
1
2
4
6
8
9
14
15
11
12
13
5
3
17
18
1. Contact your Internet Service Provider (ISP) to get the
following information:
a. Encapsulation type
b. Multiplex Mode, VPI, VCI
c. ISP IP addresses: WAN, DNS servers, Gateway, and WAN
MAC address
2. Get your Domain Name from the User
Accounts dialog box in the Control Panel.
For details, see your operating system Help
files. Get your Computer Name from the
System Properties dialog box on your
computer.
3. (Optional) Get the IP addresses of DNS
and remote servers on your LAN.
5. Connect your PC and up to three other
computers or network devices to the four
Ethernet ports.
Detailed documentation for this Quick
Installation Guide can be downloaded at
www.nortel.com.
4. Mount the
BSR252 on a wall,
or place it
horizontally or vertically (using the supplied holder) on a flat surface.
8. Set up the IP addresses on each computer connected to the BSR252:
a. Set each computer to dynamically obtain an IP address, or assign unique static
IP addresses. If you choose to assign unique static IP addresses for each
computer, choose IP addresses between 192.168.1.129 and 192.168.1.254.
b. If you assign a static IP address in step 8a, assign a subnet mask of
255.255.255.0 and a default gateway of 192.168.1.1.
c. If you chose to dynamically obtain IP addresses in step 8a, you have an option
of using Obtain a DNS server address automatically, or assigning the DNS
server IP addresses.
d. If you chose to assign unique static IP addresses in step 8a, you must assign
DNS Server IP addresses.
7. Snap the appropriate power clip
into the supplied power adapter.
Connect the power adapter to the rear
of the BSR252 and to an AC power
source.
6. Connect your ADSL Internet service to the
telephone port next to the Power LED.
10. Enter the default
user name (nnadmin)
and password
(PlsChgMe!) to log
onto the BSR252.
11. You can replace the default password (recommended)
or use it as it is.
12. Replace the factory-default
certificate.
13. On the left
navigation pane,
click Wizard.
9. In the address field of your browser, enter
192.168.1.1
14. In the General Setup window, enter the system name (your computer
name) and the domain name.
15. From the first Wizard window, choose the type of encapsulation and service
that your ISP supplies. The wizard displays different windows for each type of
encapsulation and service.
PPP over ADSL (PPPoA)
Enter the User Name and Password assigned by your ISP, and enter 100
seconds in the Idle Timeout field. Click the Nailed-Up Connection option to
keep the connection active. In the Network Address Translation list, select SUA
Only.
RFC 1483
Enter the IP Address and Password assigned by your ISP. In the Network
Address Translation list, select SUA Only.
ENET ENCAP (Ethernet)
If you have a dynamic WAN IP address, select Obtain an IP Address
Automatically; otherwise, select Static IP Address and type your ISP assigned
WAN IP address and the subnet mask in the fields provided. In the ENET
ENCAP Gateway field, enter the gateway IP address given by your ISP.
PPP over Ethernet (PPPoE)
Enter the Service Name, User Name and Password assigned by your ISP, and
enter 100 seconds in the Idle Timeout field. Click the Nailed-Up Connection
option to keep the connection active.
19. To confirm the ADSL
connection, click the
Start Diagnose button.
This test takes
approximately 20
seconds. If this test fails,
confirm steps 1-18, and
contact your service
provider.
20. Test your connection to the Internet by opening your browser and
visiting a known Web site.
17. Review your settings.
18. Click Save Settings.
N0143490
16. Depending on the type of encapsulation that your ISP
uses, enter the following information:
C
M
Y
CM
MY
CY
CMY
K
BSR252_QIG_1.pdf 12/21/2006 10:24:58 AM