NuTone 8210 Saw User Manual


 
Architectural & Engineering Specifications
March 2004
Ver tical Discharge
Ceiling Fan
MODEL: 8210
DESCRIPTION
For kitchens, laundries, commercial restrooms;
anywhere you want to move a large volume of air.
For kitchens up to 105 sq. ft., baths up to 196 sq. ft.,
other rooms up to 262 sq. ft.
Fan installs in the ceiling and ventilates directly
through the roof with round ducting.
Silver anodized aluminum grille installs with
a single screw.
Adjustable hanger bars for 16" or 24" O.C. joists.
Motor mounting bracket has two slots that slide over two
mounting screws on sleeve for faster installation.
Specially designed transition-type housing reduces
diameter of discharge opening to fit 7" round duct;
no reducer is needed.
Fits 9
1
8
" diameter opening in ceiling.
Grille extends 2" from ceiling.
Precision-balanced nylon blade.
Purchase a Washable Permanent Filter and a switch
separately from NuTone.
Refer to NuTone's catalog for a complete line of
accessories to effectively adapt this Ceiling Fan
to your construction requirements.
DESIGN FEATURES
Air Delivery: 210 CFM.
Sound Level: 6.5 Sones.
Dimensions: Housing: 9" diameter x 5
5
8
" deep.
Material & Finish: Housing: Galvanized steel.
Grille: 11" diameter metal, silver
anodized.
Motor: Plug-in, thermally protected.
Fan Blade: One-piece polymeric, 5 leaf.
Duct Size: 7" diameter.
Electric Rating: 120v, 60Hz, 0.8Amp
INSTALLATION
• Housing installs in ceiling during rough-in stage of
construction.
• Adjustable mounting brackets are furnished on the
housing. Extension-type hanger bars included for 16" or
24" O.C. joists. Motor mounts over two (2) screws located
in the housing.
• Installation Instructions are included with each unit.
ARCHITECT'S SPECIFICATIONS
Vertical Discharge Ceiling Fan shall be Model 8210 as
manufactured by NuTone according to listed specifications.
Fan shall ventilate at 210 CFM @ 0.10" S.P. and a sound
level of 6.5 Sones. Housing shall measure 9" diameter x
5
5
8
" deep and connect to 7" round duct.
8210