Filter
Top Products
Oregon
®
91VX saw chain features top performing Chamfer Chisel™ cutters.
The twin corners of the cutters on 91VX chain deliver superior performance
on the many popular saws which use low-profile 3/8"-pitch chain.
91VX .050”
91 VX is intended for use with elec-
tric saws and smaller gasoline-pow-
ered saws up to 2.5 cu. in. (41cc)
10 in. to 18 in. (25 to 46 cm)
3/8”
Ramp-shaped
depth gauges
on each cutter
Commercial
CHAIN PITCH AND GAUGE
KICKBACK – ANSI CLASSIFICATION
RECOMMENDED TYPES OF USE
RECOMMENDED SAW SIZES
RECOMMENDED BAR LENGTHS
KICKBACK-REDUCING FEATURES
PITCH
GAUGE
91VX saw chain may be capable of
kickback that could result in serious
injury to the saw operator or bystand-
ers. Do not use this saw chain unless
you have experience and specialized
training for dealing with kickback.
Saw chain with reduced kickback
potential is available.
91VX F&B A107040 AB 0807
Standard sequence: 91VX
CUTTER SEQUENCE
91VX SAW CHAIN
Advanced geometry grind Improved out-of-box grind•
Dramatic speed improvements in all cut-•
ting modes
Extreme cutting efficiency, less feed force •
required
Chamfer Chisel™ cutters with
special shaped low-vibration
heels
Twin cutting corners offering outstanding •
performance, durability and easy mainte-
nance
Less vibration than competitive chains•
Ramp-shaped depth gauges The ramp-shape reduces kickback ener-•
gies without affecting performance
Blued cutters Superior corrosion resistance•
Base-cutter hardness consistency•
Sharpens with standard 5/32"
round file and file guide
Easy hand maintenance•
Vibe-Ban™ Reduces vibration 25% or more at the saw •
handle
LubriLink™ Help keep oil where it’s needed - on the •
chain
Directs oil to the critical rivet flange/hole •
interface
Lubriwell™ Help carry oil around the full length of the •
guide bar’s groove
Enhances lubrication of the bar nose •
sprocket and bearings
Features Benefits