Filter
Top Products
External control
42
4） “Cumulative irradiation time (×100hrs)”… To set the cumulative irradiation time
(*During setting “Cumulative irradiation time (×100hrs)” is highlighted.)
・Read Reads the current value of cumulative irradiation time from the UJ35 controller into the PC.
・Write Uploads the current cumulative irradiation time from the PC to the UJ35 controller.
・Cancel Cancels the current cumulative irradiation time setting operation and reverts to
the original settings.
[Settings 2]
1) “Set MODE”… To switch the mode of the controller
(*While changing mode settings, the modes, “TEMP,” “OUTPUT,” and “Buzzer OFF” are highlighted.)
・[TEMP] Switches head temperature display between °C/°F.
・[OUTPUT] Switches external output signals between READY/BUSY.
・[Buzzer OFF] Switches the buzzer ON/OFF for each operation.
・Read Reads the MODE settings from the UJ35 controller into the PC.
・Write Uploads the MODE settings from the PC to the UJ35 controller.
・Cancel Cancels the current MODE setting operation and reverts to
the original settings.