Panasonic EY6432 Cordless Drill User Manual


 
5
19)The charger is designed to operate on
standard household electrical power
only. Do not attempt to use it on any
other voltage!
20)Do not abuse cord. Never carry charger
by cord or yank it to disconnect from
outlet. Keep cord away from heat, oil
and sharp edges.
21)Charge the battery pack in a well venti-
lated place, do not cover the charger
and battery pack with a cloth, etc., while
charging.
22)Use of an attachment not recommended
may result in a risk of fire, electric shock,
or injury to persons.
23)Do not short the battery pack. A battery
short can cause a large current flow,
over heating and burns.
24)NOTE: If the supply cord of this appli-
ance is damaged, it must only be
replaced by a repair shop appointed by
the manufacturer, because special pur-
pose tools are required.
25)TO REDUCE THE RISK OF ELECTRIC
SHOCK, THIS APPLIANCE HAS A
POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER).
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
Changes or modifications not expressly
approved by
MATSUSHITA ELECTRIC WORKS,
LTD. could void the user’s authority to
operate the equipment.