Filter
Top Products
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • F0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
E1 Series Emergency Lighting E1
Page 1 of 2 6 Volt 12 to 25 Watts Thermoplastic Housing
Lightolier is a Philips group brand
The E1 Series is a decorative emergency lighting product with integral lamps. Ideal for wall or ceiling mount applications, the E1 Series’ unique design will allow
Features
1. Illumination: Includes two high performance lamp reflector systems inte-
gral to the housing. Each lamp reflector system can be adjusted 180° verti-
cally and horizontally.
2. Housing: Constructed of impact resistant, UL 94 V-0, 5VA white or black
thermoplastic. Easy to install with its snap-together backplate and housing.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements: 12w unit: 0.112 amps (120 VAC), 0.062 amps
(277 VAC); 14-25w unit: 0.077 amps (120 VAC), 0.034 amps (277 VAC)
Code Compliance
UL 924 listed, UL damp location listing on selected units only.
Options (add to end of catalog number)
SD = Self-Diagnostics
4
V = Voltmeter (not available with Ammeter (A) option)
2
A = Ammeter (not available with Voltmeter (V) option)
2
ST = Special Input Transformer (specify voltage and frequency)
SDTD = Self-Diagnostics with Time Delay
DL = UL Damp Location Listing (Consult factory)
3
LCK1 = Line Cord (6’, 120 VAC field installed)
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories (ordered separately)
SCKTW = Ceiling Mount Canopy, White
SCKTB = Ceiling Mount Canopy, Black
WG5 = Wire Guard
PCS1 = Polycarbonate Vandal Shield
How to Specify:
E1
SERIES BATTERY/ LAMP HOUSING
WATTAGE TYPE
1
COLOR
W = White
B = Black
T6 = Tungsten 5.4W
T7 = Tungsten 7W
T9 = Tungsten 9W
H7 = Halogen 7W
H12 = Halogen 12W
Lead Calcium
12L = 12W Unit
18L = 18W Unit
25L = 25W Unit
3
Nickel Cadmium
12N = 12W Unit
3
14N = 14W Unit
3
18N = 18W Unit
3
25N = 25W Unit
3
E1 = 6V Thermoplastic
Emergency Lighting Unit
Complete Fixture consists of unit and two lamp reflector systems. Select options and accessories below.
NOTES:
1) Selected lamp wattage cannot exceed unit output rating.
2) Not available for use with SD and SDTD options.
3) Selected models are available with damp location option.
4) Not available for use with DL option.