Filter
Top Products
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • E0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
E3 Series Emergency Lighting E3
Page 1 of 2 6 or 12 Volt 14 to 50 Watts Thermoplastic Housing
Lightolier is a Philips group brand
The E3 Series provides egress lighting in a wide variety of wattages. The thermoplastic housing and high performance electronics make the units ideal for commer-
5.0”
(12.7 cm)
13.0”
(33.0 cm)
Side
View
Front View
4.5”
(11.4 cm)
6.5”
(16.5 cm)
Features
1. Illumination: Allows up to three mounted lamp heads. The standard lamp
head incorporates a high performance parabolic reflector with a wedge base
tungsten lamp. Allows maximum spacing between units along a path of
egress.
2. Housing: Constructed of impact resistant, UL 94 V-0, 5VA white thermo-
plastic. Universal J-box mounting pattern, key hole slots or shelf mounting.
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. Charging system is complete with low voltage disconnect, AC
lockout, brownout protection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed lead calcium battery has an estimated
service life of 5 years, and an operating temperature range of 65°F (19°C) to
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-
mated service life of 10 years, and an operating temperature range of 20°F
(-7°C) to 95°F (35°C).
5. Input Power Requirements:
120 VAC - 0.18 amps (20 watts);
0.08 amps (20 watts)
Code Compliance
UL 924 listed, CUL listing for 30 minute operation.
Options
SD = Self-Diagnostics
SA = Self-Diagnostics with Alarm
SDTD = Self-Diagnostics with Time Delay
V = Voltmeter (not available with Ammeter (A) option)
1
A = Ammeter (not available with Voltmeter (V) option)
1
T1 = 120 VAC Time Delay (15 minutes)
T2 = 277 VAC Time Delay (15 minutes)
LCK1 = Line Cord (6’, 120 VAC field installed)
DL = UL Damp Location Listing
2
Options (continued)
F1 = 120 VAC Fuse
F2 = 277 VAC Fuse
P1 = 120 VAC Power Switch
P2 = 277 VAC Power Switch
DC = DC Power Switch
ST = Special Input Transformer (specify voltage and frequency)
HI = Lamp Heads Installed at Factory
Multiple option configurations may void UL listing. Consult factory for specifics.
Accessories
WG5 = Wire Guard
PCS1 = Polycarbonate Vandal Shield
MSSHELFW = White Mounting Shelf
How to Specify:
E3 W
SERIES BATTERY BATTERY/ # OF LAMP HOUSING
DC WATTAGE HEADS HEADS
COLOR
W = White
6V
S6 = 5.4W
S7 = 7.2W
S9 = 9W
12V
S9 = 9W
S12 = 12.5W
S18 = 18W
1 = One
2 = Two
3 = Three
Blank = No Heads
6V, Lead Cadmium
18L = 18W
2
25L = 25W
2
36L = 36W
2
50L = 50W
2
6V, Nickel Cadmium
14N = 14W
18N = 18W
25N = 25W
50N = 50W
12V, Lead Calcium
36L = 36W
2
50L = 50W
2
12V, Nickel Cadmium
25N = 25W
50N = 50W
1 = 6V
2 = 12V
E3 = Thermoplastic
Emergency Lighting
Unit
Complete Fixture consists of unit and two lamp heads. Select options and accessories below. For additional lamp heads, see RH Specification Sheet.
NOTES:
1) Not available for use with SD, SA and SDTD options.
2) Selected models are available with damp location option.