Filter
Top Products
7
SPECIFICATIONS: Model 201, 22” Planer
Table with standard extensions........................................................................................................................ 28” x 38”
Maximum cutting width............................................................................................................................................. 22"
Maximum thickness................................................................................................................................................. 1/4"
Full width depth of cut............................................................................................................................................ 3/16"
Minimum planing length............................................................................................................................................10"
Number of knives ........................................................................................................................................................ 4
Cutterhead speed ..........................................................................................................................................4800 RPM
Cuts per minute...................................................................................................................................................19,200
Cutterhead diameter.............................................................................................................................................3-1/4"
Blade size ............................................................................................................................22-1/8" L x 7/8" W x 1/8" T
Feed rate...................................................................................................................................................20 & 30 FPM
Overall dimensions................................................................................................................ 32-1/4" W x 50" H x 50" L
Motor......................................................................... 7.5 HP, 3 Ph, 230V or 7.5 HP, 3 Ph, 460V or 7.5 HP, 1 Ph, 230V
Shipping weight ..............................................................................................................................................1,197 lbs.
NOTE: The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Powermatic reserves the right to change specifications without notice and without
incurring obligations.