Filter
Top Products
Configuration
Enabling Virtual Port Groups
SN0051103-00 A 4-5
A
All attribute values for VpGroup 4 that have been changed will
now be saved.
To enable or disable a VPGroup using the SANsurfer Router Manager:
1. Select the VPGroup in the system tree. The right panel displays information
about the selected VPGroup.
2. Select Enabled or Disabled from the Status drop-down menu. (See
Figure 4-2.)
Figure 4-2 Chassis Information for Selected VPGROUP
3. Click Save. A System Check dialog box prompts you to enter a password.
4. Enter the system password and click OK. The Set VPGroup message box
opens, as shown in Figure 4-3.
Figure 4-3 Set VPGroup Message Box
5. Click OK to close the message box.