Filter
Top Products
Configuration
Controlling per Host LUN Access on the iSR6250
4-22 SN0051103-00 A
S
Figure 4-14 shows the effect of mapping an initiator to LUN 1 using the CLI
commands shown in the previous example.
Figure 4-14 Logging into Target After Mapping LUN 1
You can accomplish the same LUN mapping using the SANsurfer Router
Manager’s Presentation Wizard.
To map LUN 1 to an initiator using the Router Manager:
1. Select Presentation Wizard from the Wizards menu.
2. Expand the router blade node (identified by its IP address), the virtual port
group node, and the device node.
3. Select LUN1 as shown in Figure 4-15, then click Next.
Host accessible LUNs
Storage Array
21:00:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f8
21:00:00:c0:dd:13:16:f9
iSR6200
Blade 1
FC1
FC2
Host Entities
Host Entity 0
21:01:00:c0:dd:13:16:f8
21:01:00:c0:dd:13:16:f9
Host Entity 1
21:02:00:c0:dd:13:16:f8
21:02:00:c0:dd:13:16:f9
Host Entity 2
21:00:00:c0:dd:13:16:f9
21:01:00:c0:dd:13:16:f9
21:02:00:c0:dd:13:16:f9
LUN 1
LUN 2
LUN 3
LUN 4
LUN 5
LUN 6
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
iqn.2004-08.com:isr6200.0834e00019.r1.00.20030020c2075970
Log-In
LUN 1