Filter
Top Products
TOOL TIPS
R6000 Drywall Screwdriver
Operation and Safety
Application: Driving screws in drywall.
Set-up and operation
Follow the steps listed below to complete a drywall screw driving project
safely.
Step Action
1
Preparation:
Step Action
1 Be sure screwdriver is in the lock-off position.
1 Install bit, if necessary.
2 Check forward/reverse lever for desired setting.
3 Adjust depth setting, if necessary.
2 Operational Instructions:
Step Action
1 Stabilize the workpiece.
2 Plug the screwdriver into a power supply.
3 Depress the switch trigger to start the screwdriver. Do not
lock the switch ON for jobs where the screwdriver may
need to be stopped suddenly.
4 Hold the screwdriver firmly and place the bit and screw at
the point to be driven.
NOTE: The bit is magnetized and will hold most
commercial drywall screws.
5 Apply quick, snap-action type pressure to the bit. The
pressure applied will engage the clutch and drive the
screw.
More on reverse . . .
WARNING:
To reduce the risk of injury, the
user must read and understand the
operator’s manual before using this
product. If the operator’s manual
which originally accompanied this
tool is missing, additional copies
are available upon request, free
of charge, at the Home Depot
Tool Rental Center. Operator’s
manuals may also be available
at www.ridgid.com or by calling
1-866-539-1710.