Menu

Roadmaster SBS2000H3 Work Light User Manual

of 2
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.ultimatelaboratories.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Screws
SBS2000H3
BEFORE USING THE SBS2000H3 SPOTLIGHT READ THESE PRECAUTIONS
• Inspect the SBS2000H3 before each use.
• Do not use the SBS2000H3 if it is broken, cracked, damaged or worn parts are ob-
served, any spotlight that appears damaged in any way, or operates abnormally shall
be removed from service immediately.
• The SBS2000H3 spotlight is not a toy. Keep out of reach of children.
• Do not use the SBS2000H3 spotlight for any purpose other than temporary lighting.
• Do not look directly into the light beam when it is ON.
• Do not leave the SBS2000H3 unattended when it is ON or recharging.
• Do not use in overly wet conditions.
• Do not use immerse the light in water or any other liquids, it is not waterproof.
• Do not expose to fire or high temperatures, the battery may explode.
• Do not operate the spotlight facing down on a surface especially in the proximity of
flammable objects.
• Charging produces hydrogen gas that may explode when exposed to fire. Do not
charge use near flame or spark.
• Do not aim the spotlight in peoples eyes as it may cause damage or blindness
• You must use the AC adaptor supplied with the SBS2000H3. Do not use any other
adaptor to charge the battery.
• Before charging move all switches to the OFF position.
• Do not completely discharge battery before recharging as this will decrease the
battery’s life.
• Charge the battery completely before using the SBS2000H3 for the first time.
• Do not store the SBS2000H3 spotlight for extended periods of time. Charge every
three months during storage.
• Do not charge the battery for an extended period of time. Overcharging will greatly
shorten battery life.
• Overcharging may result in battery overheating and leakage.
• Avoid charging at temperatures below 39 / 4.
• The DC adaptor’s plug becomes very warm when in use. Use caution when unplug-
ging from receptacle.
• Recharging time is dependent upon how discharged the battery is, never charge for
more than 9 hours.
• Do not charge longer than the times stated.
AC CHARGING ADAPTOR
Do not leave the SBS2000H3 unattended when charging the battery.
Fully charge battery after each use.
Fully charge battery every 3 months to maintain battery life.
Allowing discharged batteries to sit for several months will reduce lifetime.
1. Insert the DC plug into the jack
on the side of the SBS2000H3,
then plug the AC adaptor into a
110V AC outlet.
2. The Red LED will light to
indicate the battery is charging.
3. The both Green LEDs will
light when the battery is fully
charged.
Dear Customer,
CONGRATULATIONS. The SBS2000H3 High Output Spotlight when used as de-
scribed, will give you years of dependable service in your home, car, truck, RV, or mini-
van. We have taken exacting measures in quality control to ensure that your product
arrives in top condition and will perform to your satisfaction.
In the rare event that your SBS2000H3 High Output Spotlight is missing an item,
contains a damaged part, does not perform as specified, requires warranty service, or
you have an installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE.
PLEASE CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-
445-1797 and ask to speak with a member of our technical service team; or submit your
questions to technicalsupport@ultimatelaboratories.com and a member of our techni-
cal service team will respond by email to your questions.
Our in-house technical service team will expedite delivery of your part, advise you on
installation, or help troubleshoot a problem with you. If your product needs warranty
service, our technical service team representative will help you obtain the fastest rem-
edy possible under the warranty.
Precautions
Specifications
Operation
MAIN LIGHT
Charge the battery completely before using the spotlight for the first time.
Press the ON/OFF switch under the handle to turn the unit ON.
LED LIGHT
The side LED lamp is controlled by the push button switch on the lens of the LED light.
Press the switch once to turn the LED light ON, press it again to turn it OFF.
Press the switch again to turn on the LED light in flash mode, Press it again to turn it
OFF.
ADJUSTABLE BASE
The SBS2000H3 has an adjustable multi-position base.
ADJUSTABLE STRAP
The strap on the spotlight can be adjusted by sliding the adjustable buckle.
Charging Status Panel
Adjustable Multi-Position Stand
Multi-function LED Light
Bulb: ................................................................................12 Volts @ 55 Watts H3 Halogen
Battery: .......................................................................................12V DC @ 4.5 Amp Hours
Case: ....................................................................................................... High impact ABS
Internal Fuse: .........................................................................................................10 Amps
On / Off Switch: ....................................................... Rocker Switch on Underside Handle
AC Wall Charger: ....................................................................................15V DC @ 600 ma
Multi-color LED Panel: ..............................................................................Charging status.
Dual Purpose LED Lamp: .......................
Area or Flashing White Light. Three Position Switch.
Carry Strap ..................................................................................... Adjustable/Removable
Adjustable Base ............................................................................................Multi-Position
Adjustable Carry Strap
Important
To maximize battery life, maintain battery charge before storage. Do
not charge for more than 9 hours. Never overcharge the battery.
Do not attempt to disassemble battery or remove any parts from the
battery or terminals.
Do not attempt to burn or incinerate.
When disposing of the SBS2000H3 do so in accordance with local regulations pertain-
ing to disposal of lead acid batteries, plastics and glass. Regulations may vary.
Contact your local Solid Waste Authority for recycling information.
1. Remove the five screws from the rear panel of the spotlight.
2. Remove the rear panel from the body of the spot light.
3. Disconnect the red and black wires from the old battery, and re-
move the battery from the body of the spotlight.
4. Replace the battery with a battery that has same voltage and am-
perage rating as the original. (12V DC @ 4.5 Amp hours)
5.
Reconnect the Red Wire to the Positive (+) battery terminal and the
Black Wire to the Negative (-) battery terminal.
6. Reinstall the battery to its original position inside the body of the spotlight.
7. Reinstall the rear cover and tighten the five screws. Do not overtighten the screws.
Change the Battery
Do not charge for more than 9 hours.
ON/OFF Switch
next

Roadmaster SBS2000H3 Work Light Discussions


Need help with this product?


Related Roadmaster Products







TRUSTe Seal


  • Facebook
  • Twitter
  • ManualsOnline Blog
  • ManualsOnline Google Plus