Filter
Top Products
Carton
Length Item Code
Count
Finish
¾ P11BAB 10.0M Galv
7
⁄
8
P12BAB 10.0M Galv
1 P13BAB 10.0M Galv
1¼ P15BAB 10.0M Galv
1½ P17BAB 10.0M Galv
¾ P11BABB 10.0M Galv Band Line
7
⁄
8
P12BABB 10.0M Galv Band Line
1 P13BABB 10.0M Galv Band Line
1¼ P15BABB 10.0M Galv Band Line
1½ P17BABB 10.0M Galv Band Line
¾ P11BPE 10.0M Standard Galv
1 P13BGBN 5.0M Stainless
7
⁄8
1
¾
1¼
1½
P
1
®
©2007 Senco Products, Inc. www.senco.com
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
The MWXP wide crown stapler is lightweight and well balanced,
minimizing operator fatigue, Has excellent power, speed to handle the
most demanding applications.
Item #: 120120N Contact Actuation (Dual Action)
Weight: 7.4 lbs. ( 3.35 kg)
Height: 9 ¾" (247.6 mm)
Length: 12 ½" (317.5 mm)
Staple Capacity: 140+
Operating Pressure: 80-120 psig
Mode of Operation: Tool is available with either sequential
or contact actuation trigger mechanism
Hose Fitting:
3
⁄8" NPT
Crown 1" (25.4 mm)
Width: .062 (1.6 mm)
Thickness: .055 (1.4 mm)
Capacity 140+
Staples: Drives 16 ga. staples from ¾" (19 mm) - 1 ½" (38 mm)
For butt joints, lathing, insulation, and belt line attachment on mobile
homes. Felt applications & foam insulation in building construction.
Corrugated carton to skid, furniture & cabinet frames.
• Five year limited warranty, XtremePro™ designed
• High load capacity (140 plus staples)
• Special wearplate and hardened safety
• EZ-clear
™
latch provides quick and easy clearing of occasional jams
MWXP
XtremePro
™
16 Gauge Wide Crown Stapler
Choose the right trigger system for your specific needs!
Sequential Actuation Trigger (also known as restrictive trigger or trigger fire)
operates in the following a sequence - depress the safety element at the nose of tool
against the work surface then pull the trigger. After each fastener is driven, release the
trigger and lift the tool off the work surface before starting the sequence again. This
trigger is recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or bottom fire)
operates in the following sequence- pull the trigger first and keep the trigger pulled
while moving the tool along the work surface with a bouncing motion, depressing
the safety element at the nose of the tool against the work surface where the fastener is
to be driven. This trigger is recommended for use by trained professionals only in
high production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions. For additional information on trigger systems and
how SENCO will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 800-543-4596 to find your nearest Authorized Senco Dealer, Distributor
or visit our web site at: www.senco.com
®
©2007 Senco Products, Inc.
www.senco.com