Filter
Top Products
©2005 by Senco Products, Inc. www.senco.com
Fastening Solutions
™
Applications:
Features and Benefits:
Tool Specifications:
Fastener Specifications:
The SCN56 is a superior siding tool that drives full round head nails
from 1-7/8” to 2-1/2” in length and from .092 to .099 nail shank
diameter. The SCN56 is a lightweight, rugged and dependable
multi-purpose coil Nailer. The SCN56 coil Nailer has a unique mode of
operation. The SCN56 allows the operator to select either a dual action
or restrictive mode of fastening by simply switching the trigger – No
need to change parts!
Item #: 990001N - Switchable triggering system
Tool Weight: (Unloaded) 6 lbs. (2.73 kg)
Height: 12" (270 mm)
Length: 12-1/2" (280 mm)
Collation: Wire weld coil
Mode of Operation: Switchable triggering system –either sequential
or contact actuation trigger mechanism.
Hose Fitting: 1 ⁄4 " NPT
Siding, exterior decks, decking, exterior trim, fencing, subflooring,
wood shingles, crate and box assembly and floor sheathing.
• Switchable trigger — Allows the operator to select the fastening
mode (Dual action or restrictive)
• Dual collation — Allows the choice between wire weld and SENCO
plastic sheet collation. (Plastic sheet collation is limited to direct
industrial customers at this time.)
• Adjustable depth of drive — Allows for consistent and controllable
drive
• Comfort grip — Reduces operator fatigue
• Adjustable exhaust deflector — Direct air in a variety of directions
• Detachable no-mar pad — Protects work surfaces
• Fastener Range — 1-7/8"—2-1/2"
• Light weight — 5.8 lb
• High load capacity — Holds up to 350 nails
SCN56
Medium Coil Nailer
For additional information on how SENCO Power Fastening Systems
will save you time, reduce costs, and increase quality, call our toll-free
Action Line: 1-800-543-4596 to find your nearest Authorized Senco
Dealer or Distributor . Visit our web site at: www.senco.com
Drives full round head nails from 1-7/8" — 2-1/2" in length and from
.092 — .099 nail shank diameter.
Sequential Actuation Trigger (also known as restrictive trigger or
trigger fire) operates in the following a sequence - depress the safety
element at the nose of tool against the work surface then pull the trigger.
After each fastener is driven, release the trigger and lift the tool off the
work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or
bottom fire) operates in the following sequence- pull the trigger first and
keep the trigger pulled while moving the tool along the work surface
with a bouncing motion, depressing the safety element at the nose of
the tool against the work surface where the fastener is to be driven. This
trigger is recommended for use by trained professionals only in high
production or volume applications.
Always read the Operators Manual and Safety Instructions with all tools
to ensure proper use and safety precautions or log on to
www.senco.com or call 1-800-543-4596 for more information on
SENCO’s trigger systems. Choose the right trigger system for your
specific needs!
21
7
/8
2
1
/2
EL (.0915)
ED (.0915)
2
1
/4
BK (.099)
BE (.099)
®
F
U
L
L
R
O
U
N
D
H
E
A
D